mosskoi/Boktai-UV-sensor
1
0
Fork 0
Code Wiki Activity

Update WiFi Version

mosskoi
2025-10-19 23:22:59 +01:00
parent 7440df3ea6
commit 1a38633222
1 changed files with 14 additions and 13 deletions
Download Patch File Download Diff File Expand all files Collapse all files

27
WiFi-Version.md

@@ -13,12 +13,13 @@ Microcontroller code: To capture UV light and send information over to the serve
Lua Server: mGBA's script that runs a server and converts UV signal to in-game sun level
## You'll need
- [X] 1 microcontroller of your choice
- [X] 3 jumper wire
- [X] 1 UV light sensor
- [X] 1 microcontroller of your choice.
- [X] Jumper wires..
- [X] 1 UV light sensor.
- [X] 1 USB cable between the computer and the microcontroller to flash the software.
- [X] Arduino IDE.
- [X] mGBA
- [X] ROM dump of Boktai
- [X] mGBA.
- [X] ROM dump of Boktai.
Don't know which microcontroller to get? I'd recommend an esp32.
@@ -34,25 +35,25 @@ The total price for all these together shouldn't go over 5$.
# Step 2: Microcontroller
1. Have the microcontroller, jumper wires and UV sensor at hand
1. Have the microcontroller, jumper wires and UV sensor at hand.
2. Connect them with jumper wires, GND to GND, VCC to power supply, and SIG to your GPIO with analog read of choice.
3. Connect it to your PC via a USB cable.
4. Open Arduino IDE.
5. Open the Source code.
6. Under "Tools" make sure your Board and Serial port are correct, if you your board is not there you'll need to download them on "Board Manager"
6. Under "Tools" make sure your Board and Serial port are correct, if you your board is not there you'll need to download them on "Board Manager".
7. Check for your pinout and change the value of UV_SIGNAL_READ to that GPIO number.
8. Edit SSID to your WiFi's name
9. Edit PASS to you WiFi's password
10. Edit HOST to your computer's local IP
8. Edit SSID to your WiFi's name.
9. Edit PASS to you WiFi's password.
10. Edit HOST to your computer's local IP.
11. Flash the code to the microcontroller.
# Step 3: Lua server
1. Open mGBA
2. Start emulating the patched rom.
3. Under "tools" go to "scripting..."
4. File and load script
5. Select the lua script
3. Under "tools" go to "scripting...".
4. File and load script.
5. Select the lua script.
# Step 4: Enjoy the game
Reboot the microcontroller in case it didn't connect, but reconnection should be handled.