mosskoi/Boktai-UV-sensor
1
0
Fork 0
Code Wiki Activity

Update Serial Version

mosskoi
2025-10-20 03:59:58 +01:00
parent 1a38633222
commit d9463f1482
1 changed files with 16 additions and 14 deletions
Download Patch File Download Diff File Expand all files Collapse all files

30
Serial-Version.md

@@ -36,25 +36,27 @@ The total price for all these together shouldn't go over 5$.
# Step 2: Microcontroller
1. Have the microcontroller, jumper wires and UV sensor at hand.
2. Connect them with jumper wires, GND to GND, VCC to power supply, and SIG to your GPIO with analog read of choice.
3. Connect it to your PC via a USB cable.
4. Open Arduino IDE.
5. Open the Source code.
6. Under "Tools" make sure your Board and Serial port are correct, if you your board is not there you'll need to download them on "Board Manager".
7. Check for your pinout and change the value of UV_SIGNAL_READ to that GPIO number.
8. Flash the code to the microcontroller.
1. [Download the source code here](https://git.mosskoi.com/mosskoi/Boktai-uv-sensor-microcontroller)
2. Have the microcontroller, jumper wires and UV sensor at hand.
3. Connect them with jumper wires, GND to GND, VCC to power supply, and SIG to your GPIO with analog read of choice.
4. Connect it to your PC via a USB cable.
5. Open Arduino IDE.
6. Open the Source code.
7. Under "Tools" make sure your Board and Serial port are correct, if you your board is not there you'll need to download them on "Board Manager".
8. Check for your pinout and change the value of UV_SIGNAL_READ to that GPIO number.
9. Flash the code to the microcontroller.
# Step 3: Lua server
1. Open mGBA
2. Start emulating the patched rom.
3. Under "tools" go to "scripting...".
4. File and load script.
5. Select the lua script.
1. [Download the source code here](https://git.mosskoi.com/mosskoi/Boktai-mGBA-lua-server)
2. Open mGBA
3. Start emulating the patched rom.
4. Under "tools" go to "scripting...".
5. File and load script.
6. Select the lua script.
# Step 4: Python client
[Download the source code here](https://git.mosskoi.com/mosskoi/Boktai-Python-Serial-to-TCP-bridge)
This one might differ a bit if you're on linux or windows
Windows: