mosskoi/Boktai-UV-sensor
1
0
Fork 0
Code Wiki Activity

Update Serial Version

mosskoi
2025-10-20 03:59:58 +01:00
parent 1a38633222
commit d9463f1482
1 changed files with 16 additions and 14 deletions
Download Patch File Download Diff File Expand all files Collapse all files

30
Serial-Version.md

@@ -36,25 +36,27 @@ The total price for all these together shouldn't go over 5$.
# Step 2: Microcontroller # Step 2: Microcontroller
1. Have the microcontroller, jumper wires and UV sensor at hand. 1. [Download the source code here](https://git.mosskoi.com/mosskoi/Boktai-uv-sensor-microcontroller)
2. Connect them with jumper wires, GND to GND, VCC to power supply, and SIG to your GPIO with analog read of choice. 2. Have the microcontroller, jumper wires and UV sensor at hand.
3. Connect it to your PC via a USB cable. 3. Connect them with jumper wires, GND to GND, VCC to power supply, and SIG to your GPIO with analog read of choice.
4. Open Arduino IDE. 4. Connect it to your PC via a USB cable.
5. Open the Source code. 5. Open Arduino IDE.
6. Under "Tools" make sure your Board and Serial port are correct, if you your board is not there you'll need to download them on "Board Manager". 6. Open the Source code.
7. Check for your pinout and change the value of UV_SIGNAL_READ to that GPIO number. 7. Under "Tools" make sure your Board and Serial port are correct, if you your board is not there you'll need to download them on "Board Manager".
8. Flash the code to the microcontroller. 8. Check for your pinout and change the value of UV_SIGNAL_READ to that GPIO number.
9. Flash the code to the microcontroller.
# Step 3: Lua server # Step 3: Lua server
1. Open mGBA 1. [Download the source code here](https://git.mosskoi.com/mosskoi/Boktai-mGBA-lua-server)
2. Start emulating the patched rom. 2. Open mGBA
3. Under "tools" go to "scripting...". 3. Start emulating the patched rom.
4. File and load script. 4. Under "tools" go to "scripting...".
5. Select the lua script. 5. File and load script.
6. Select the lua script.
# Step 4: Python client # Step 4: Python client
[Download the source code here](https://git.mosskoi.com/mosskoi/Boktai-Python-Serial-to-TCP-bridge)
This one might differ a bit if you're on linux or windows This one might differ a bit if you're on linux or windows
Windows: Windows: